How To Select Manual Feed Try On Mac



  1. Loading Paper in the Manual Feed Tray
  1. How To Select Manual Feed Try On Mac Pro
  2. How To Select Manual Feed Try On Mac Catalina

You can load A3+, A3, B4, A4, Letter, Legal, 11' x 17' (279.4 x 431.8 mm), 8' x 10' (20 x 25 cm), 10' x 12' (25 x 30 cm), and 14' x 17' (36 x 43 cm) sizes of paper in the manual feed tray.

Express setup provides a balance between personal privacy, security, and features. Select Continue. MacOS has 2 different looks. Select the one that appeals to you the most, then select continue. Your Mac will complete setup. You will be presented with the macOS desktop. Your Mac is ready to use! You should see a 'Printer' button at the bottom of the print dialog. This is how you access your printer specific settings. There will be a warning message that pops up when you select this function, you should not change anything that Reader tries to control, but manual feed will be OK. Follow these steps to make sure that Manual Feed mode is Off. Press the Power button to turn on the product. Do not select Manual Feed from the drop-down list. Try the print job again. The paper might be held in the tray and not allowed to feed into the product. Explore the world of Mac. Check out MacBook Pro, iMac Pro, MacBook Air, iMac, and more. Visit the Apple site to learn, buy, and get support. I print a lot of documents from the manual feed tray. I just changed to a new computer. On my old computer, whenever I wanted to print to the manual feed tray, I would choose the appropriate paper source from the page setup menu in MS Word - both first page and other pages (I was using 2007 version, I am now using 2013 version).

How To Select Manual Feed Try On Mac

How To Select Manual Feed Try On Mac Pro

Note

Mac
  • We recommend Canon genuine photo paper for printing photos.

    For details on the Canon genuine paper, see Media Types You Can Use.

  • The manual feed tray does not accept plain paper.When printing on plain paper, load it in the rear tray.
  • When printing on paper other than 14' x 17' (36 x 43 cm) size from a PictBridge compliant device, load paper in the rear tray.

How To Select Manual Feed Try On Mac Catalina

  1. Prepare paper.

    If paper is curled, flatten it.

    Note

    • If paper is curled, hold the curled corners and gently bend them in the opposite direction until the paper becomes completely flat.

      For details on how to flatten curled paper, see 'Load the paper after correcting its curl.' in Paper Is Smudged/Printed Surface Is Scratched.

    • When using Photo Paper Plus Semi-glossSG-201, even if the sheet is curled, load one sheet at a time as it is.If you roll up this paper to flatten, this may cause cracks on the surface of the paper and reduce the print quality.
  2. Open the paper support (A) of the manual feed tray, and pull it out.

  3. Open the paper output tray (B) gently.

    Important

    • If the disc tray guide (C) is open, be sure to close it.
  4. Pull out the output tray extension (D).

  5. Slide the paper guides (E) to open them, and load ONLY ONE SHEET OF PAPER in the center of the manual feed tray WITH THE PRINT SIDE FACING YOU.

  6. Slide the paper guides (E) to align them with both sides of the paper stack.

    Do not slide the paper guides too hard against the paper.The paper may not be fed properly.

    Important

    • Always load paper in the portrait orientation (F).Loading paper in the landscape orientation (G) can cause paper jams.

  7. Check if the paper is set properly in the manual feed tray.

    Make sure that the paper is set firmly against the bottom of the manual feed tray and against the paper guides by slightly jiggling the paper up and down.

Note

How To Select Manual Feed Try On mac
  • When printing, select the manual feed tray for the paper source and the size and type of the loaded paper on the print settings screen of the printer driver.
  • To continue printing from the manual feed tray, wait until printing is complete, then load the next sheet.